KEEP IN MIND THIS IS ONLY FOR ADDRESSABLE LED RIBBON/PIXEL TAPE. NOT LED FILM FIXTURES
Hardware Solutions:
Use an LED DMX decoder with a CRMX receiver plugged into it
Use an device with built-in CRMX support like an RC4 Lumen Dimmer/DimPix
Network Solution (NO CRMX):
Connect an ESP32 running WLED to your network to receive sACN
Requires a router and networking knowledge.
Important Note: Addressable LEDs use specific protocols, so verify that your decoder is compatible with your LED strip type before purchasing. Working with LEDs and decoders requires DC Power experience.